Artwork information Round self-adhesive labels, free format
- Free format selection:
- Width: min. 2,5 - max. 10 cm
- Height: min. 2,5 - max. 10 cm
- Important: Starting from the specified format, a 2 mm bleed must be applied all round, important information with at least 4 mm distance to the final format
- Special requirements for creating the artwork:
- Please observe the following for transparent stickers/films:
- the lighter the print colour, the more transparent does the film seem
- the motif is printed right-reading (self-adhesive side on the reverse of the motif)
- if a motif is applied to the inside of a window to be seen from the outside, the print files must be created as mirror image
- Please observe the following for transparent stickers/films:
- Resolution: 300 dpi
- Include a surrounding trim of 2 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- Four-colour print on the front, reverse blank (4/0)
- custom-shaped labels
- permanently adhesive
- ready to use and easy to peel off
- the labels are placed freely (without scrap material) side by side on the carrier material
- placed freely, without scrap material, on the carrier material
- if you order labels on one single roll, you will get one roll with a width of 33 cm and internal diameter of 7.6 cm; the stickers with be placed side by side
- if you order an individual roll, you will get one roll with the width of your ordered stickers
- Note: white is not printable on clear stickers, i.e., any white areas in the print template will become transparent.