Artwork information Hinged lid boxes with tear notch
- free format selection
- Special requirements for creating the artwork:
- The print design must protrude 3 mm into the inner edge of the adhesive flap (overfill); the rest of the adhesive flap must remain unprinted.
- Black elements must be created with 100 % black only (e.g. barcodes such as EAN, QR-codes, text etc.)
- Resolution: 300 dpi
- Include a surrounding trim of 3 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Comments will be deleted and not printed
- Form field content will be printed
Print templates
Product details
- Four-colour print on the front, reverse blank (4/0)
- hinged lid boxes with large opening, ideal for flat products
- with click closure on the inside and tuck flap on the outside; no glue needed
- easy to open thanks to a large lid
- design: FEFCO 0427
- corrugated cardboard is primarily made of waste paper – lower consumption of resources, energy and water
- 100 % recyclable and eco-friendly
- resistant to humidity and temperature fluctuations thanks to high-quality cardboard
- delivered flat, not assembled
- How to assemble:
- 1) Fold up the front and rear panel,
- 2) folding their lateral flaps inwards to form a frame.
- 3) Put the side panels over and press them into the slots inside the box.
- 4) Fold the large flaps on the lid inwards and push them into the box.
- 5) Insert the closing flap, i.e. the small flaps on the lid, into the openings of the side panels.
- Please observe the data sheet.